preliminary product brief publication number 17-3520-13 international: connect one ltd. 20 atir yeda street kfar saba 44643, israel phone: +972-9-766-0456 fax: +972-9-766-0461 email: sales@connectone.com http://www.connectone.com usa: connect one semiconductors, inc. 560 s. winchester blvd. suite 500 san jose, ca 95128 tel: (408) 572-5675 fax: (408) 572-5601 copyright ? connect one ltd., 2008-2012. all rights reserved . nano wireach ? miniature embedded secure wifi module general description: nano wireach ? is a secure embedded wireless lan bridge that easily connects embedded devices to 802.11b/g wireless lans. it includes the ichip ? co2144 ip communication controller ? chip and marvell 88w8686 wifi chipset. it is packaged in 33x17mm rohs-compliant ultra-slim low profile form factor. nano wireach makes adding wifi connectivity to embedded devices a breeze. it does not require any kind of wifi driver development on the host cpu, and its multiple interface (uart, spi, rmii and usb) minimize the need to redesign the host device hardware. connect one?s high-level at+i? api eliminates the need to add wifi drivers, security and networking protocols and tasks to the host application. nano wireach supports the ssl3/tls1 protocol for secure sockets, https and ftps, wep, wpa/wpa2 (psk and enterprise) wifi encryption. nano wireach firmware and configuration parameters are stored in on-board flash memory. the module is power-efficient: the core operates at 1.2v, while i/os operate at 3.3v. power save mode further reduces power consumption. typical applications: adding wifi to serial embedded devices replacing lan cable using wifi adding ssl security to m2m solutions nano wireach supports several operation modes: ? lan to wifi bridge - allowing transparent bridging of lan over wifi, using direct rmii connection to existing mac hardware or direct phy-to-phy connection. ? serialnet tm serial to wifi bridge - allowing transparent bridging of serial over wifi, using the 3mbps fast uart. this is a true plug-and-play mode that eliminates any changes to the host application. ? ppp modem emulation ? allowing existing (e.g. modem) designs currently using ppp to connect transparently over wifi ? full internet controller mode ? allowing simple mcu to use the nano wireach?s rich protocol and application capabilities to perform complex internet operations such as e-mail, ftp, ssl, embedded web server and others. it also acts as a firewall, providing a security gap between the application and the network. the ii-evb-363mw evaluation board provides an easy environment for evaluating the nano wireach. microcontroller emac ethernet phy ethernet phy wireach microcontroller wireach rmii phy-to-phy mac-to-mac emac wireach ethernet serial usb spi microcontroller embedded device 802.11b/g
preliminary product brief publication number 17-3520-13 international: connect one ltd. 20 atir yeda street kfar saba 44643, israel phone: +972-9-766-0456 fax: +972-9-766-0461 email: sales@connectone.com http://www.connectone.com usa: connect one semiconductors, inc. 560 s. winchester blvd. suite 500 san jose, ca 95128 tel: (408) 572-5675 fax: (408) 572-5601 copyright ? connect one ltd., 2008-2012. all rights reserved . hardware description: ? size: 33.76 x 18.0 x 5.5 mm ? core cpu: 32-bit risc arm7tdmi, low-leakage, 0.13 micron, at 48mhz ? operating voltage: +3.3v+/-10% ? operating humidity: 90% maximum (non-condensing) ? operating temperature range: industrial commercial -20c to +75c -10c to +65c -4f to 167f 14f to 149f ? power consumption: ? transmit ?250ma@16dbm, 235ma@12dbm (typical) ? receive ? 190ma (typical) ? power save mode ? 8ma ? rf connector: u.fl of hirose ? connector: low profile 30 pin ? host interface: serial, spi, rmii and usb device. ? rohs-compliant; lead-free wireless specifications: ? standards supported: ieee 802.11b/g ? frequency: europe ? 2.412-2.472ghz usa ? 2.412-2.462ghz ? channels: europe ? 13 channels usa ? 11 channels performance specifications: ? host data rates: o uart: up to 3mbps o spi: up to 12mbps ? serial data format (at+i mode): asynchronous character; binary; 8 data bits; no parity; 1 stop bit ? serial data format (serialnet mode): asynchronous character; binary; 7 or 8 data bits; odd, even, or no parity; 1 stop bit ? flow control: hardware (-rts, -cts) and software flow control. internet protocols: ? arp, icmp, ip, udp, tcp, dhcp, dns, ntp, smtp, pop3, mime, http, ftp and telnet ? security protocols: ssl3/tls1, https, ftps, rsa, aes-128/256, 3des, rc-4, sha-1, md-5, wep, wpa/wpa2 (psk and enterprise) ? protocols accelerated in hardware: aes, 3des and sha application program interface: ? at+i protocol for internet controller mode ? serialnet mode for transparent serial data-to-internet bridging ? lan-wifi transparent bridging ? ppp operation mode for modem-wifi conversion warranty: one year certifications: ? radio & emc: - usa o fcc modular approval, fcc id: xm5-sm2144n1 o cfr title 47 fcc part 15, subpart b and c - canada o industry canada module approval ic: 8516a-sm2144n2 o industry canada ices-003, rss- gen, rss-210 - eu o en 300 328 (r&tte directive 1999/5/ec) o en 301 489 (emc directive 2004/108/ec) ? safety: o ul 60950 o can/csa-c22.2 no. 60950 o en 60950, low voltage directive (2006/95/ec) installation requirements: the nano wireach must be installed within a full-enclosure device that is safety certified.
preliminary product brief publication number 17-3520-13 international: connect one ltd. 20 atir yeda street kfar saba 44643, israel phone: +972-9-766-0456 fax: +972-9-766-0461 email: sales@connectone.com http://www.connectone.com usa: connect one semiconductors, inc. 560 s. winchester blvd. suite 500 san jose, ca 95128 tel: (408) 572-5675 fax: (408) 572-5601 copyright ? connect one ltd., 2008-2012. all rights reserved . pin assignments: pin signal type description pin signal type description 1 v dd power 16 readiness output ichip ready 2 gnd power 17 ddp analog usb device positive 3 rxd0 input uart 0 receive 18 ddm analog usb device nega tive 4 txd 0 output uart 0 transmit 19 vdd power 5 ncts0 input uart 0 clear to send 20 gnd power 6 nrts0 output uart 0 request to send 21 etx_en output rmi i transmit enable 7 data_rdy output data ready 22 rmii_refclk output rmii re ference clock 8 msel input mode select 23 crsdv input rmii carrier sense and data valid 9 nreset input reset module. 24 erxer input rmii receive e rror 10 nrf_led output rf led indicator 25 emdio i/o management data i/o 11 nspi1_cs input spi 1 chip select for host 26 emdc outp ut management data clock 12 nspi1_clk input spi 1 clock for host 27 etx1 output rmi i transmit d ata 1 13 nspi1_miso output spi 1 slave out for host master i n 28 erx1 input rmii receive data 1 14 nspi1_mosi input spi 1 slave in for host master out 29 etx0 output rmii transmit d ata 0 15 nspi1_int output spi 1 have data on his buffer 30 erx 0 input rmii receive data 0 mechanical view: all measurements are in millimeters: ordering information part number description iw- sm2144n1-us nano wireach module, for usa, industrial temp., exter nal antenna iw- sm2144n1-eu nano wireach module, for europe, industrial temp., ex ternal antenna iw- sm2144n1c nano wireach module, commercial temp., external anten na, for usa (configurable for europe) ii-evb-363nw-us-110 evaluation board for nano wireach module for usa, with 110v power supply adaptor, external antenna ii-evb-363mw-eu-220 evaluation board for nano wireach module for europe, with 220v power supply adaptor, external antenna iw-cab-150 miniature coaxial pigtal cable. ufl-sma connectors. 1 50mm length. iw-ant2-bl 2.4ghz wifi antenna, 2.0dbi, 50 , omni-directional, 1/4 wavelength dipole configuration ichip, ip communication controller, at+i, wireach, serialnet and connect one are trademarks of connect one ltd. specifications are subject to chan ge without notice.
|
